CLO 헬프센터
ottoline
- 총 활동 수 1489
- 내가 팔로우하는 사용자 수 0명
- 나를 팔로우하는 사용자 수 35명
- 마지막 활동
- 투표 수 1
- 구독 수 668
- 회원 가입일
댓글
ottoline의 최근 활동-
You can use a folded pattern. However > The only way to get a knife edge on the fold is to set the fold angle low and then also 'zero' out (0) the force on the fold (it's default is 5 ). The tip ...
-
I would say unless it's complex to tool (thereby costly or time consuming) simply make a prototype as lamination's typically never quite match the computer simulation anyway, as you get issues like...
-
Looks like you have something on in the scene. Checklist: Go to the scene tree to ensure there is no other 'object' element in the scene, eg: a lamp, floor, ground plane. This can be done in the ...
-
CHECKLIST: Make sure that ALL your seam >Sewing line types are correct, so that the additional collision distance does not factor into the seam junction. If this is not set to the right type you ...
-
Brendon you don't need particle distance 2 for that garment. That is overkill.You will get a good draped simulation by being much better organized in how you proceed with mesh subdivision in locali...
-
Users settings > settings > Graphic options > toggle on/off > Use VBO's
-
You can use the feature (toggle) in the 3D window.
-
Lena if you haven't got it to work you need to use a good svg file for the logo. That is key, then you will find it is easy to use. So I think all your problems are directly related to the quality ...
-
For logotype work, that is going to embroidery it is convention to convert all the fonts and shapes to fill or outlines (stroke weights), that are joined properly, then grouped, then checked for qu...
-
Lena the fault you have with your logotype is due to how you are making the vector line.Grouping artwork will be useless unless they are closed shapes, poor vector construction is not suitable for ...