Avatar

danielemanassero

  • Total activity 397
  • Last activity
  • Member since
  • Following 2 users
  • Followed by 3 users
  • Votes 26
  • Subscriptions 160

Activity overview

Latest activity by danielemanassero
  • Avatar

    danielemanassero commented,

    Hi Mattia, I did some shoes in Clo.The be clear Clo is not th best tool to make shoes, but they can be done. You have to create a rectangle big enough to draw an internal line on it that follow the...

  • Avatar

    danielemanassero commented,

    Hi dplokhikh,as Pablo pointed out the problem is in the pattern. It totally missed the crotch point shape.It must be more like the image below.As you can see in your picture there's a seam in the c...

  • Avatar

    danielemanassero commented,

    Hi kartiayla, the trial version is totally equal to the official version.Look at this: https://youtu.be/fEmlgtxx1VA I recommend you to have a look at the wonderful course Clo has just realized on h...

  • Avatar

    danielemanassero commented,

    Hi kartiala, pressing the spacebar to turn off/on the simulation or click on the narrow icon in the upper-left corner of the 3d window bar Daniele.

  • Avatar

    danielemanassero commented,

    I hope this image can help.

  • Avatar

    danielemanassero commented,

    It is a pattern or a graphics? If it is a pattern place it  in the 3d window as super impose under, probably you must have to flip the normal beacause the outside of the fabric is by default showed...

  • Avatar

    danielemanassero commented,

    Hi Iyvone, How can I cut circular holes into a fabric?     Draw a internal circle in the pattern then select it , right-click and from the drop down menu choose "convert to hole"  Now you can copy ...

  • Avatar

    danielemanassero commented,

    Hello, usually is good to start using the defaul fabric, that rarely has problem with simulation.. For this t-shirt you can use a cotton rayon jersey. Being so thight the sleeve must be placed very...

  • Avatar

    danielemanassero commented,

    Hello, when nedeed, you can also select the point, right-click and choose "covert to curve point" then move it manually.This also works viceversa, select a curve point and "convert it to a segment ...

  • Avatar

    danielemanassero commented,

    Hi sudolisa, I'm really happy that my suggestion helps you to solve the problem.I want to add one thing, If you give the elastic property to the holes lines at 100% ratio value it will keep them mo...