Disappeared Gizmo

Follow

Harper Clothing Company

• 2019年06月15日 17:44

My Gizmo does not show up on the screen. I cannot seem to get it back. HELP! It makes making buttons really hard! 

0

• pabloquintana

  • 2019年06月15日 19:11

  Latifa, does zooming out helps? I imagined you are working zoomed all in because you said buttons. I think there is no way around it, but zoom out a bit and then move your items from a bit afar.

   

  

  2
• ottoline

  • 2019年06月30日 23:01

  If you use the keyboard short cut > Number pad [2] > when the 3D window is active the view will return to the front scale view with the garment and you can re-frame your viewpoint.

  0
• vvo1tv

  • 2020年05月27日 20:55

  I don't know how this mode turned on, but I have the same problem. I found that in this mode, the viewport works like in classic 3D programs. The cursor selects a reference point. It is displayed in the 2D window. W - move mode. E - rotation mode. I'm happy )

  0
• chicagopatternmaker

  • 2021年03月13日 23:27

  I just ran into this issue and what fixed it was making sure the simulation mode button was NOT blue, resetting 2d arrangement, pressing the pattern piece in the 3D window and clicking E. The gizmo finally showed up! 

  0
• CLO Designers

  • 2021年03月15日 04:39

  Hi here, if you cannot find the Gizmo in 3D window, please double-check the points below:

  1. Turn off Simulation.

  2. You are not zooming in too much see the 3D pattern.

   

  If the issue still persists,  please go to Settings from the menu bar > Users Settings > 3D > Gizmo and select Unified Gizmo. Then the Gizmo tool can be seen in 3D window again.

  If you are selecting Divided Gizmo, you may need to use the short key (Q) to Select / (W) to Move / (E) to Rotate.

  

  0

请先登录再写评论。