Auto Convet to Avatar - Rig Issue

Follow

lepedwardson

• 2 de maio de 2024 11:02

When I use the auto convert to avatar option, it does a decent job at creating arrangement points but the rig is off. When I try to add poses from the Clo library they are slightly deformed, I've attached some images for reference.

Do you have any suggestions on how to improve the rigging? Anything I could do in clo or to the model would be great.

• #animation
• #avatar

0

• US Designer Support

  • 2 de maio de 2024 18:05

  One thing we would recommend is upgrading to CLO 2024 as this will help.

   

  1
• tiina516869

  • 8 de setembro de 2024 12:36

  I'm having the same problem in the latest version of Clo3D - 2024. The fingers are always broken. I've tried exporting an avatar with A pose from Clo to Blender and aligning my model as closely as possible before auto converting without luck.

  0
• CLO Designers

  • 9 de setembro de 2024 08:30

  Hi tiina516869,

  Could you try this workaround and see if it helps? Load the file in CLO, save it as an AVT (File --> Save As --> Avatar). Then use this AVT when converting. It can help with smoother results.

  0

Por favor, entrar para comentar.