Actually it is possible, has been for years,with sending the outputs to other tools. (many are open source) https://vimeo.com/201495281 https://vimeo.com/201509275 including realtime grading of the...

• 댓글 보기
• ottoline
• 2020년 01월 17일 04:19
• 편집된 시간
• 0표

When making quilted or padded nylon coats, I always use the clone over pattern as mentioned by daniele with additional offset. But what I also do is add in another important step for all quilted pa...

• 댓글 보기
• ottoline
• 2020년 01월 14일 21:52
• 편집된 시간
• 0표

azok the internal dart you manually drafted is not joined at each apex.   When you create a polygon or polyline shape from more than one line, to cut that shape as a closed polyshape you need to us...

• 댓글 보기
• ottoline
• 2020년 01월 14일 21:37
• 편집된 시간
• 0표

Pass the file onto CLO3D and get them to check it. I am assuming you are using a unique custom avatar character and not a hybrid CLO3D avatar. If you have used a CLO3D avatar (exporting and importi...

• 댓글 보기
• ottoline
• 2020년 01월 09일 23:19
• 편집된 시간
• 0표

 Open the collada file in another software, to check that it is actually a good export, before trying to import it into CLO3D. - you need to check the fault is not with how you are exporting. Check...

• 댓글 보기
• ottoline
• 2020년 01월 09일 01:50
• 편집된 시간
• 0표

What is your hardware spec? Make sure you don't have photoshop, pdf or other apps open at the same time as CLO3D (eg: printing or disk cleaning services) when you test to see if that helps speed up...

• 댓글 보기
• ottoline
• 2020년 01월 06일 01:13
• 편집된 시간
• 0표

It's an import issue with Gerbers setup. CLO3D files work fine.  People at the other end (suppliers) need to know how to set up gerbers many features for importing. Most are not properly trained in...

• 댓글 보기
• ottoline
• 2020년 01월 04일 21:19
• 편집된 시간
• 0표

Hello ifashion, You can always take an avatar out into a modelling software and alter it slightly to get the shape you want and then create a morph. This can be done using a free application like b...

• 댓글 보기
• ottoline
• 2020년 09월 29일 06:50
• 편집된 시간
• 0표

It's quite easy to adjust the avatars into a custom size, but you need to perhaps start with the right process as there is a definite approach to take when creating custom avatar sizes.   One of th...

• 댓글 보기
• ottoline
• 2020년 09월 29일 06:49
• 편집된 시간
• 0표

Here is some help on how to make a micro weave map and get the textures out from vray. See >> (video help) Good luck.  

• 댓글 보기
• ottoline
• 2020년 01월 01일 10:10
• 편집된 시간
• 0표