Rib Collar

Follow

dyrholm

• 2018년 11월 30일 08:45

Hi,

 

I am making a polo with a rib collar, and I have two issues with the collar:

1. In real life the rib collar is a bit smaller than the neckline, and then it is stretched when sewn on to the garment (correct me if I am wrong)

But I guess I will have to change some settings to make the collar more elastic? Otherwise it is just dragging the garment, and that doesn't look good. How do I do this?

 

2. As it is now (because I couldn't figure out a solution to my first question), I made the collar for the polo in the same measurement as the neck line.

The problem is that it wrinkles a lot in the fold line. Below you can see what I have tried to do:

- Expressing double layers: changed the curvature to 80%, and changed Add'l Thickness - Collision to 1.0 and Add'l Thickness - Render  to 2.0

- Apply Bond

- Making the fold look more natural by changing it to Quadrangular Mesh. 

 

None of this helps. 

It helps to Strengthen the collar. Then it gets a nice and smooth look in the beginning, but the fabric gets too stiff and in the end it won't fold. 

How can a make a good-looking collar?

0

• Permanently deleted user

  • 2018년 12월 03일 02:40

  @dyrholm, 

  First of all, may I know the particle distance you are using for the collar pattern?

   

  You can make the collar more elastic by adjusting the fabric's material properties, especially Stretch-Weft, Warp, and Shear.

  Please take a look at below articles:

  https://support.clo3d.com/hc/en-us/sections/115000716127-Fabric-Physical-Properties-

  https://support.clo3d.com/hc/en-us/articles/115013191087-Constructing-a-Collar-Lapel

   

  0
• dyrholm

  • 2018년 12월 03일 09:02

  The particle distance is 5.

  I have tried to adjust stretch-weft, warp and shear, but nothing is happening. if I try to adjust all the different settings, it helps a little bit.

  But the fold line is still quite wrinkled, and doesn't look smooth.

  0
• Permanently deleted user

  • 2018년 12월 07일 02:50

  would you be willing the share your file?

  0
• aladdintraore

  • 2020년 05월 24일 19:44

  Hey Erica,

  I am having the same issue. It seams making a good looking rib collar is very difficult.

  Also it seems there is no tutorial on this particular issue.

  I have tried playing around with the "elastic" option applied to a single segment (the edges of the ribs) but it does not help because for some weird reason going above 100 in the ratio input does not translate into having a longer 3d line. it shrinks if anything....

  Any advise would help since I have spent plenty of time already looking into different options and it is now becoming frustrating.

  Thanks a lot

  THeo

  0
• vadsura

  • 2020년 05월 25일 13:36

  For a polo collar, use a fabric that stretches along the weft thread and does not stretch along the warp thread

  https://www.clo3d.com/clollab/artwork/3433

  0
• pablo.quintana

  • 2020년 05월 25일 20:28

  You can try with the Shrinkage option in the weft.

  0
• arshadlml

  • 2021년 01월 13일 08:48

  Please help me i want to creat same to same coller in clo3d please help me plz plz my email address is: arshadlml@gmail.com

  0

댓글을 남기려면 로그인하세요.