How to Roll up a Sleeve

Follow

Dita Varna

• 2018년 10월 25일 09:17
• 편집된 시간

Hey everyone, 

Hope you had a great and creative weekend!

I would like to share a quick tutorial on how to roll up a sleeve without cutting the pattern.

 

VIDEO - https://youtu.be/zW_01k42QsE

 

1. Create fold lines with Internal Polygon;

2. Fold up the hem of the sleeve and part of the placket with Fold Arrangement Tool, make sure that the surfaces of the placket and the sleeve don't cross;

3. Hide the sleeve and activate Arrangement Points - arrange the cuff; 

4. Reposition the cuff piece and make sure that it does not go into sleeve piece - surfaces don't cross;

5. Strengthen the sleeve, simulate, make sure that the simulation is stable before Unstrengthening;

6. Unfreeze the little placket piece, position it under the sleeve and sew it to the Internal Line, make sure it is completely under the sleeve;

7. While holding down W add a Pin to the top of the little placket, and while simulation is running, position it as close as possible to the button;

8. Use Flip Normal function, if after closing the button, it doesn't show up on top of the placket. 

 

3

• Permanently deleted user

  • 2018년 01월 29일 02:07

  It's so cool!

  2
• murato77732

  • 2018년 01월 29일 02:47

  Thank you, morning is good news, very professional!
    I'm sure that many users will really like your video.
    Below at me, the sleeves were made too.
  
  
  
  
  
  

  1
• Dita Varna

  • 2018년 01월 29일 09:06

  @zhanart great work! The belt detail is very nice! 

  0

댓글을 남기려면 로그인하세요.