How can I simulate graphic on both sides of the chest so that the letters are the same?
I would like to know how I can use the tool: "Transform 3D Graphic" to be able to put the letters and the same color on both sides of the chest and on the zipper. Since when separating the two parts I can only simulate graphics in a part of the chest, and I can not put them in the two parts.
By doing it individually they do not match and I would like to know if there is any way to adjust or put them equally on both sides of the chest as in the photo.
In this photo is what I have put and only lets me add in one part the option of: "Transform 3D Graphic"
In this photo it's how I would like it to stay. How could I do it so it looks like the picture?
Thanks in advance.
-
If the graphics are not displayed correctly, set the partikle dist = 5 and perform a simulation. Unfortunately, the side slices, the thickness of the fabric is not painted with graphics.
You can edit the size and position of the graphics to achieve a match.
0 -
You will be able to texture side slices in an external texturing editor, if the export is fbx and uncheck the checkbox uv.
0 -
Look a branch of a forum Tips&Tricks there similar questions were discussed.
0 -
Hello Vadsura.
Thank you very much for your comments I have some questions that have come up.
How did you do to hide the zipper? And when putting the colors in the side parts that you hide in the zipper as you do?
In what way can I find it in this topic in Tips and tricks that I have to create to see more topics like this and I get several results?
Do you have a video tutorial where I can do these steps that you explain to be able to see it again and again so that I can see all the details?
Thank you very much and I await your answers.
0 -
Hi Fran. Here is the forum section Tips and Trix. Here you will find a lot of useful. https://support.clo3d.com/hc/en-us/community/topics/115000546408-Tips-Tricks
I have not used the zipper tool. This is just a strip of fabric sewn from the bottom with a zipper texture. See the picture of the patterns in the picture above.
0 -
Hola Vadsura.
Solo tengo una pregunta al agregar dos telas nuevas a los lados y coserlas cuando me dices que los colores que les pongo no te quedan bien.
Justo en el medio, como puedes ver en la imagen, me quedo en blanco y eso es exactamente lo que me gustaría poner en el mismo color, cómo lo hiciste.
Mi pregunta es: ¿Cómo has puesto los colores en esos dos lados para que sean dos nuevas telas? ¿Cómo puedo resolver este problema para poner los colores a los lados que están en blanco y permanecer como pasé en tu imagen?
Ya que no logro que se quede igual que tú.
0 -
Thank you very much for your help since I only have this problem to solve.
0 -
Waiting for your answer vadsura. Thanks in advance.
0 -
Sorry I forgot to put it in English. Here it is:
Hello Vadsura.
I have only one question when adding two new fabrics to the sides and sew them as you tell me the colors that I put on them do not fit like you.
Right in the middle, as you can see in the image, I'm left blank and that's just what I would like to put the same color, how you did it.
My question is: How have you put the colors to those two sides to be two new fabrics? How can I solve this problem to put the colors to the sides that are blank and stay as I passed in your image?
Since I do not get it to stay the same way as you.
0 -
Vadsura if you have a video of how you did it, I would be very grateful to you because that way I would be seeing how you do it step by step and it would be easier for me. Since it guided me better with a video.
Thank you.
0 -
Hi Fran.
I hope so will be clearer. Sew it as in life. Do you know how to sew, know the technology? This is a program for those "who can sew";)
0 -
Gracias Vadsura, ahora tengo más claro cómo tuve que coserlo.
Me gustaría saber: ¿Cómo ha podido dar el pliegue lateral de esta manera, cómo podría doblar el pliegue que está al lado?He puesto una textura de cremallera, pero me gustaría saber también. ¿Cómo se pone el inicio y el final de la cremallera? ¿Dónde encontró el principio y el final de la cremallera para poder editarlo como lo hice con los rieles del bastidor?
Gracias de antemano y disculpa las molestias.
Mira cómo lo tengo hasta ahora para que puedas tener una idea de lo que he estado haciendo.
0 -
Hi vadsura, the end of the zip is gourgeous , is it a texture an obj or what else?
PS. I'm one who sew. :)0 -
Greetings, my sewing brother. You're absolutely right. This is obj, imported as trim.
0 -
Vadsura and how can I do it? How can I import it into obj and sew it on my jersey?
Danielemanssero Thank you for the pockets are perfect. Do you know how to do what Vadsura says?
Any video would be useful for me to be able to practice it and get better performance since that way I can use it for future projects and add modifications.
Thank you very much to both of you in advance and I await your messages.
-1 -
Hi Fran.
I work as a freelancer. If you do not have time to make a big project. Contact me, I can help. Prices are very affordable. You know the rule. In order to become a professional in some field, you need to devote time to 5000 hours.
I have a lot of experience in the sewing business and know the Clo3d from the very first version. Even before the division into clo and MD.
With pleasure I will help in the implementation of all your ideas.
Light designs and fast rendering.Regards.
0 -
Hello Vadsura.
I work as a graphic designer and I have been sewing fabrics with machines for years. I have to dedicate a lot of time and dedication to my work.
But the advice and help I give others about my work and how they can improve do not charge any "affordable price". Therefore this is a forum where we help each other to improve, if you intend to charge me prices and you consider that your help is worth money, I prefer that you do not help me.
Since the fact of helping others in a forum should not be charged as no one who knows here does that.
I do not need any price. I just need to add those sides to the sides of the zipper. If you want to help me without cracking prices, I'll be very grateful. But if you do not want to help me do not come with prices or anything like that.
I hope you understand that this Clo3d program is new for me and I only know some tools that I have learned in 2 months, either alone or with the help of others in the forum.
I do not understand why you want to charge me when all of us here help each other to improve.
-1 -
Sorry Fran. I'm not going to take money for help on the forum. It seemed to me that you do not have time, and you need urgently. Perhaps this is the fault of GoogleTranslate and I did not understand you correctly. I suggested to you that I can 'sew' several models into the clо if you need it urgently. The forum is absolutely free.
I hope my advice was useful to you.Regards.
0 -
Vadsura I do not need you to give me anything.
Just give me a video of how you have exported the image in OBJ and how to do it little by little. And to be able to give that thickness to the sides on the sides of the zipper.
I know how to sew. I just need you to explain that to me. Nothing else.
-1 -
Do not sew. Just explain me with some video tutorial of how you did it to do it myself too.
JUST THAT. OKAY?
Thank you.
-1 -
Vadsura here I spend what Daniele did to me and how I have it until now.
So you can see how I got it done.
If you want me to "sew for free" and "help me just sew the sides of the zipper I'll thank you"
But if you're going to charge me for sewing them. Better not. Okay?
I leave here the link so you can see:
https://drive.google.com/file/d/1Dejjj8SX359ZK5_SSOrwseIdqXIkngWs/view?usp=sharing
Tank you in advance.
-1 -
Hi Fran.
This topic was about graphics, this problem is solved, right?
In this thread you will find people who are ready to help you with other questions.https://support.clo3d.com/hc/en-us/community/posts/360028953333-online-fact-to-face-tutorual
Regards.0 -
I have to post on all the three threads you have now participated Fran. I am not a moderator for this forum, but I am an avid and professional user of CLO. Your written tone and replies to Vadsura, plus your continuous demand to the community and especially Daniele are rude and off limits for a free support group.
If you are not willing to pay for support from CLO or anyone of us professionals, then you have to take the help as it is even if its not what you like. You can't demand a video or someone to take you through every little step. You have to try yourself, search for more information, try again and patiently wait for people (that are not here waiting for your questions) to have time to give you a pointer or something.
I'm not sure, but I'd think Vadsura is no longer interested in supporting you, even if you paid. I wouldn't. My suggestion is that you find a professional, pay their fees, and learn from that person or have them make your project until you learn.
@Erica or @Anh, I'd love you to comment on this too.
Pablo
0 -
I apologize to Vadsura and the Clo3d community, it was not my intention to offend or argue with anyone, I just wanted to find some quick solution to my problem.
Pablo Quintana in this community I am a novice and I apologize for not knowing how to better manage the posts and did not know many things that I have reported.
I would like to know: what kind of prices are there so that you can help me professionally?
I am willing to pay always and that it is something professional and something serious. Thank you very much and I apologize for what has been misinterpreted by me.
Thank you.
0 -
Vadsura I apologize if I offended you in something. It was not my intention.
I am willing to pay an affordable price for helping me and solving my problem.
Thank you and sorry Vadsura.
Fran.
0 -
Thanks for understanding Fran. I believe is fair to keep a healthy collaboration space.
Vadsura, I wouldn't want you to think you needed my help to speak for you. I just thought it was important to use this an example.
P
0 -
Fran, it's okay. No offense. Your desire for knowledge is welcome. We all were newbies. There are some good videos on Clo YouTube channel. If you watch gradually, 2-3 videos per day and put into practice, you can quickly achieve good results. Some issues are not resolved quickly. For example, you want to get a 3d model from a picture. For this you need another 3d editor such as a blender or any other. I am not an expert in video recording and editing.
0 -
Hello Vad.
The zipper problem has already solved it. I tried Blender and it was harder to put the lashes on them, but it came out, but I did not put it on.
I made something much easier and which is how I left it at the end. I explain to you what I did in case it would help you to cover the zipper:
Place two internal lines, and inside the internal lines I placed the zipper, that way the outer part creates tabs that pop out and cover the zipper automatically.
With Blender I also covered my zipper, but at Clo3d I liked it more like I did.
Thank you very much for your advice Vad. And many thanks to the Community of Clo3d for helping me in this problem that I have finally been able to solve.
Thanks from everyone.
0
Comments