CLO HELP CENTER

How can we help you?

Adjust Avatar Size (ver5.0.0 and Above)

Follow

Objective

Create an avatar with your own measurements.

As CLO Avatar Editor is powered by thousands of real body scan data, even measurements not assigned by users automatically adjust to the most realistic body shape.


Location

Main Menu ▶Avatar ▶ Avatar Editor ▶ Avatar Size


Operation

  1. Load an Avatar (.avt).
    Only New_Female_Beta and New_Male_Beta avatars can be adjusted.

  2. Follow the indicated path below:

    Main Menu ▶Avatar ▶ Avatar Editor ▶ Avatar Size

    → Measures appear on the Avatar. The editable measures appear in black, whereas the non-editable measures appear in grey.


  3. Refer to below graph and adjust the Avatar as needed.

    Option   Description
    Select Avatar    Select the Avatar to be edited. This option only appears when two or more Avatars are in the 3D window.
    Total Body

       Shape the overall body type with Avatar's height and chest width.

       In order to get realistic shapes for body parts without assignable measurements, use the Total Body option to create an overall shape and then insert measurements under the Details option. 

    Height   

    Assign Avatar's height.

    ※Note:

    * Use the drop-down menu on the right to select the unit of the Height. The default unit follows the program's unit.

    * Degree of Accuracy based on Height Measure Standard:
    HPS Height > Inseam > Total Height

    Total Height

     Insert the height measured from the ground to the head.

    ※Note: It is more accurate to assign height with either HPS Height or Inseam option as individual has different head length.

    The Total Height option is not recommended as it has the lowest accuracy.

    HPS Height  Insert the height measured from the ground to the neck.
    Inseam  Insert the height measured from the ground to the crotch.
    Width Assign Avatar's width and shape its overall body shape.
    Details 

    Configure Avatar's detailed measurements.

    Due to a technical reason, a small error may be generated even after inserting a specific measure. The error appears in parentheses next to each measurement and the real measurement can be checked with the measure appears on the Avatar. Edit the Avatar based on the measure appears on the Avatar as the numbers appear in the Avatar Editor only shows the measurements assigned by users.

    ※Note:

    * Use the drop-down menu on the right to select the unit of the Height. The default unit follows the program's unit.

    * Each measurements can be checked with the measure appears on the Avatar.

    Basic

     Use the Basic option when only a small amount of body measurements are available.

    Unassigned body parts are automatically adjusted based on the real body scan data and the measurements inserted by the user.

    Advanced

     Use the Advanced option when available body measurements are abundant.

    When all measurements under the Advanced options are not available, please use the Basic option to create more realistic body as unassigned measurements are fixed with the default values pre-assigned to each option.

    ____.png Show All Measurements/ ____.png Show Editable Measurements

     By default, only editable measurements appear in the window.

    To view all measurements, click the ____.png Show All Measurements icon.



  4. Use the save.png Save button to save the adjusted measurements and use the open.png Open button to reload. However, any measurements created with lower versions are not compatible.
Was this article helpful?
3 out of 3 found this helpful

Comments

Please sign in to leave a comment.