CLO HELP CENTER

How can we help you?

Rotate

Follow

List of Contents

Rotate

Clockwise/Counterclockwise

X/Y Axis

Parallel To

 

Objective

Rotate Patterns and Internal Shapes/Lines based on various references.


Location

Main Menu ▶ 2D Pattern ▶ Edit ▶ Transform Pattern / Edit Pattern 

2D Toolbar ▶  Transform Pattern /  Edit Pattern 


Operation

Rotate

  1. Follow the indicated guideline below:

    Main Menu ▶ 2D Pattern ▶ Edit ▶ Transform Pattern / Edit Pattern 

    2D Toolbar ▶  Transform Pattern /  Edit Pattern 

  2. Select the Pattern or Internal Shapes/ Lines or Baselines to be rotated.
    → The marquee box appears around the selected item.

  3. Click and drag the rotate point on top of the marquee box.
    → The selected item rotates towards the mouse.

    ※ Note:

    • While clicking and dragging the Pattern, Internal Shapes/Lines, or Baselines, right click to access the Rotate window.
      Type in the desired angle, then click OK. The selected item rotates based on the entered value (ver3.2.0).

Clockwise/Counterclockwise

  1. Follow the indicated guideline below:

    Main Menu ▶ 2D Pattern ▶ Edit ▶ Transform Pattern / Edit Pattern 


    2D Toolbar ▶  Transform Pattern /  Edit Pattern 

  2. Click on the Pattern or Internal Shapes/Lines to be rotated. Then, right click to access the pop-up menu.

  3. When the pop-up menu appears, select Clockwise (45º) or Clockwise (90º) or Counterclockwise (45º) or Counterclockwise (90º)
    → The selected pattern rotates according to the chosen options.

X/Y Axis

  1. Follow the indicated guideline below:

    Main Menu ▶ 2D Pattern ▶ Edit ▶ Transform Pattern / Edit Pattern 

    2D Toolbar ▶  Transform Pattern /  Edit Pattern 


  2. Click on the Pattern or Internal Shapes/Lines to be rotated. Then, right click to access the pop-up menu.

  3. When the pop-up menu appears, select X-Axis or Y-Axis.

  4. Select the line of a Pattern which should be rotated to the chosen axis.
    → The selected Pattern or Internal Shapes/Lines are rotated to X-Axis or Y-Axis on the basis of the selected line.  

Parallel To

  1. Follow the indicated guideline below:

    Main Menu ▶ 2D Pattern ▶ Edit ▶ Transform Pattern / Edit Pattern 

    2D Toolbar ▶  Transform Pattern /  Edit Pattern


  2. Click on the Pattern or Internal Shapes/Lines to be rotated. Then, right click to access the pop-up menu.

  3. When the pop-up menu appears, select Parallel to...

  4. Select the line of any Patterns or Internal Lines/Shapes in the 2D window which the previously selected Pattern or Internal Shapes/Lines are rotated to. This line acts as a fiducial line.
    → The selected line turns red.

  5. Then, select the line of the rotating Pattern or Internal Shapes/Lines that will rotate parallel to the fiducial line selected above.
    → The Pattern or Internal Shapes/Lines rotates parallel to the fiducial line.

Go back to the List of Contents

Was this article helpful?
1 out of 2 found this helpful

Comments

Please sign in to leave a comment.