How to reduce the stiffness of the fabric?
Hi everyone!
Query 1- How can I reduce the stiffness of the fabric? the fabric that I have used here is Cotton 50s poplin, also have tried the other cotton types available in CLO library but not able to reduce the stiffness on the shirt.
Please note: No bond, strengthening or seam taping is applied on the fabric yet the fall of the fabric is not smooth or natural.
Query 2- The fabric is not falling proportional on the avatar, on one side the fabric is falling away from the avatar and other side is falling straight on the avatar.
The pattern is exactly symmetric and equally cut.
Kindly provide any solution that can be applied to fix this. Thank you!
-
I hope you are well and thank you for your questions.
Regarding your first question, all fabrics in the CLO library have been physically measured based on real fabric. Therefore, the digital fabric is draping the same way the real fabric would. If you would like a fabric that is softer in drape, you can have a look at purchasing additional fabrics from CLO-SET Connect
2. You can use adjust the garment with Simulation ON, also adding some Pins to position the hem in place.
If you would have an identical left and right side, a nice trick is to delete one half of the garment and make a direct symmetric copy of the other side, using (CTRL or CMD D).
This is will create an exact replica of the first side. You will then need to close up the CF & CB.
I hope this helps.
Take care,
0
評論