3D line length is way too short compared to the 2D line length: how to change the 3D line length?

Follow

sgcata

• 2021年03月15日 12:37
• 已编辑于

hi there

clo automatically shrinks the 3D line length a little, but in my case the length changed from 0.80 to 0.31 ..... this is way too short and you can see it on the garment. i checked everything else and this seems to be the problem because on the other side of the pattern it looks normal and the 2d line length is 0.80 and 3d line length is 0.77.



Can i somehow change the 3d lange length or the settings to solve the problem?

0

• CLO Designers

  • 2021年03月15日 15:23

  Hi sgcata, thanks for submitting your question. I would recommend you to check your sewing. Make sure that the lines, that you want to sew together, have the same or at least a similar length. If one line is shorter, it will also shorten the 3D line length of the connected line.

  Please try this and let us know if it worked.

  0
• sgcata

  • 2021年03月15日 15:32

  thanks for your answer!
  the lines have the exact same length, also the sewing is correct. i could not solve the problem so i had to extend the line in the pattern on purpose, now it looks quite good. 
  its strange, but making the 2d line length longer to get the 3d length of the original 2d line was the only way to somehow manage it.

  0
• CLO Designers

  • 2021年03月16日 07:42

  Hey sgcata, I am happy that you found a solution for now. You could also check if the same happens if you delete the Seam Taping/ Bonding at the pattern outline. Otherwise you might need to go with your workaround :)

  0

请先登录再写评论。