Trims not moved when I added same file as add Project file

Follow

sthayig

• 2023年12月30日 05:15

I developed a 3D bag in Marvelous Designer/CLO3D added a few Hooks/others as TRIMS and saved the same file with two different names. Reopend the file and add another file as "ADD Project".

The file is added and moved to the given coordinates.  All Patterns and others moved except the trims. Trims did not move

 

 

 

 

0

• CLO Designers

  • 2023年12月31日 06:50

  Hi sthayig,

  When the trims were imported, were they loaded as avatars or as trims? If you are unsure, a trim, in the 3D window, will have a glue bottle icon, an avatar will not. The avatar will have the same properties in the PE as a human avatar (e.g. Skin Offset).

  0
• sthayig

  • 2023年12月31日 08:25

  Hi CLO Designer Team

  They are imported as Trims - glued & aligned, later they are "unglue" and set Collision ON in the Property editor and simulated.  The file is saved and imported the same file as "Add project"

   

  0
• CLO Designers

  • 2023年12月31日 16:44

  Hi sthayig

  Once unglued and Collision is turned on the trim is more like an Avatar and not a trim. So it will not move with the garment. You will need to leave the trim Glued

  Also as you are using MD we would recommend posting to their Forums or Official Discord channel as we can only speak to CLO here

  0
• sthayig

  • 2023年12月31日 17:00

  Hi CLO Designers

   

  Thanks for your quick Help. Others Noted.  

  0

请先登录再写评论。