Bemaniak, your post doesn't make much technical sense on the import to Lectra, and the asking for it to be resolved by CLO3D? The fault according to your post as I read it is 100% with Lectra's imp...

• Visualizar comentário
• ottoline
• 29 de setembro de 2020 03:41
• Editado
• 2 votos

theatruong   In CLO3D you can definately have more than one object with a texture. It's all down to how you assign your UV and texture maps to the model and then how you export that. Most times you...

• Visualizar comentário
• ottoline
• 9 de novembro de 2019 08:34
• Editado
• 2 votos

There are a few ways to print scale 1:1 patterns.   1.) You can print direct to a connected plotter. 2.) You can create a marker type .png snapshot output direct to the fabric layout for pattern pi...

• Visualizar comentário
• ottoline
• 3 de outubro de 2019 03:08
• Editado
• 2 votos

  laurenpryor 01 Use Fold arrangement tool on your rectangular pattern placing an internal fold line > select fold line in 3D window to raise fold gizmo > turn over pattern item > simulate down (se...

• Visualizar comentário
• ottoline
• 30 de julho de 2019 12:07
• Editado
• 2 votos

Hello Eliza I do quite a mix of high tech garments for manufacture, and for these internal pattern details I always use a rectangle if it's a straight line, or if it's a curve a slight offset poly-...

• Visualizar comentário
• ottoline
• 12 de julho de 2019 00:48
• Editado
• 2 votos

Made with CLO3D/MD   Software: stevenabbott.co.uk decorative knots application State-of-the-art in knots software The most awesome > knotplot.com > application ( Knots can be loaded from a databas...

• Visualizar comentário
• ottoline
• 10 de julho de 2019 23:48
• Editado
• 2 votos

Performance sports wear can fall into complex compression type single weave garments, which can be very different in terms of garment design and development, so you maybe need to be specific regard...

• Visualizar comentário
• ottoline
• 18 de agosto de 2022 23:59
• Editado
• 1 voto

You may add in planar wind to the CLO3D scene and model to help flatten out the cushion when using inflate. That can crush down the cushion peaks from using the inflate setting. See > wind > planar...

• Visualizar comentário
• ottoline
• 7 de agosto de 2022 03:34
• 1 voto

You may cheat the detail and still feel good about it. We all do it. :-)   If your computer is not as modern as some of the latest hardware, you can send projects to be cloud rendered at CPU applia...

• Visualizar comentário
• ottoline
• 24 de julho de 2022 02:44
• Editado
• 1 voto

There are two process flows happening within CLO3D > the technical pack that describes the 2D pattern pieces, cut lines,colorways, trim, grading and detailing with specification and measurement dat...

• Visualizar comentário
• ottoline
• 24 de julho de 2022 02:35
• Editado
• 1 voto