Central de Ajuda da CLO
ottoline
- Atividade total 1489
- Seguindo 0 usuário
- Seguido por 35 usuários
- Última atividade
- Votos 1
- Assinaturas 668
- Membro desde
Comentários
Atividade recente por ottoline-
You can import any single object as a 'trim' object model prop. You can then 'glue' the trim prop to the fabric. So in the model you place an insertion point (x,y,z) (0,0,0) co-ordinate on the mod...
-
See below how I simulate a cascade of duchess satin setting the simulation particle mesh size to 5mm on the pattern > do this in the property editor. You then need to set your simulation to > CPU ...
-
You can manually change the mouse and keyboard shortcut keys in the user settings.
-
before uninstalling look at > user settings > try looking at your mouse and keyboard shortcuts > you can manually set them to use the keys you want > hence you can re-apply the key(s) , scales, im...
-
You need to lower the pattern piece >particle distance > from the default 20mm > to a lower value like 5mm in the property editor > and run the simulation on the GPU > non linear complete > to ge...
-
They are already on the avatar in the measurement table. You can use the edit measure tool and select them to bring up the dimension or you may select the name of the measure in the avatar editor...
-
The avatar editor does allow you to adjust measures but what you also need to recognize is that all human shape is attached to scalars within the boned human frame - that is how human shape works r...
-
The measurements work by calling up a database of human shape and thus if you change a chest size it will look to adjust 'relational' dimensions (eg: under-bust) within the maximum and minimum huma...
-
There is a simple trick here > switch on edge curvature to the pattern piece so you get more edges in the mesh then lower the particle mesh density to something like 5mm. Basically the more vertice...
-
As CLO3D saves the default backup usually to every 3 minutes interval (unless you switched that off) you can always reload a garment or even open another version of the same project at the previous...