Central de Ajuda da CLO
ottoline
- Atividade total 1489
- Seguindo 0 usuário
- Seguido por 35 usuários
- Última atividade
- Votos 1
- Assinaturas 668
- Membro desde
Comentários
Atividade recente por ottoline-
Looks like the grain lines in the plt file are not sitting on the patterns. What plotter print driver are you using ? And then what plot viewing software are you using ? It could be that the plot v...
-
Set the CLO3D fabric type to the special preset > leather in the property editor > then add your textures to a new fabric material in CLO3D. These test suede textures are recreated from a small 5cm...
-
Puku, because you started off by importing the avatar in from DAZ, you can simply export only the garment and use the textured avatar that you originally imported into CLO3D and should still have b...
-
mushtaqvahanvaty, maybe load the project into the CLO3D cloud and share it so we can take a look at it. It still looks like your particle mesh distance is too larger (reduce to 5mm) and you also ...
-
On the lower hem patterns if you place in a stiff tape the edges will stiffen and won't be so prone to pulling up. You can also change the sewing seam type angle of these two pattern pieces at the ...
-
Three options: (Ref: CLO3D Version: 5.1.320 (r44124) Alt + 0 is the keyboard shortcut to toggle on/off Use the 'X' to close the pop-up modal - (make sure you are using the latest CLO3D releas...
-
Change the collar patterns mesh density distance down to something like 5mm. Also check the pattern pieces Additional rendering thickness is not at the default value '0'. If it is try raising it to...
-
Check out this thread where MD and poser users discuss it at length and then the resultant > MD7 to poser bridge that's been kicking around for some time by one MD user who has plugged straight i...
-
The avatars are now type one and type two. The size presets also only work based on the 2 avatar types.
-
msiriw, Try going to > settings > User Settings > Graphic Options > Try toggling on/off VBO's Then restart the application and see if that makes a difference.