How to Roll up a Sleeve
Hey everyone,
Hope you had a great and creative weekend!
I would like to share a quick tutorial on how to roll up a sleeve without cutting the pattern.
VIDEO - https://youtu.be/zW_01k42QsE
1. Create fold lines with Internal Polygon;
2. Fold up the hem of the sleeve and part of the placket with Fold Arrangement Tool, make sure that the surfaces of the placket and the sleeve don't cross;
3. Hide the sleeve and activate Arrangement Points - arrange the cuff;
4. Reposition the cuff piece and make sure that it does not go into sleeve piece - surfaces don't cross;
5. Strengthen the sleeve, simulate, make sure that the simulation is stable before Unstrengthening;
6. Unfreeze the little placket piece, position it under the sleeve and sew it to the Internal Line, make sure it is completely under the sleeve;
7. While holding down W add a Pin to the top of the little placket, and while simulation is running, position it as close as possible to the button;
8. Use Flip Normal function, if after closing the button, it doesn't show up on top of the placket.
-
It's so cool!
2 -
Thank you, morning is good news, very professional!
I'm sure that many users will really like your video.
Below at me, the sleeves were made too.
1 -
@zhanart great work! The belt detail is very nice!
0
Comentários