Problem while using Add Dart feature

Follow

scofty

• 27 décembre 2020 16:25

every time i try to create a dart from a straight line or a curve line

the same window appear (as shown in fig.) 

thanks, appreciate your help

1

• Commentaire officiel

  CLO Designers

  • 4 avril 2021 21:13

  @hansa We will gladly help you with your issue if you could describe it here with screenshots or post your video so it can be viewed directly not downloaded.
• danielemanassero

  • 28 décembre 2020 09:46

  Hi scofty,  as you can read in the message, it appears to show how the line is when the dart is folded/sewn and help to eventually adjust the curve points if needed.
  When you hit ok or enter it disappear and the ( adjustment,if done, will be applied)

  Daniele

  0
• scofty

  • 29 décembre 2020 05:31
  • Modifié

  The problem is that I don't want to drag or smooth my curve (it's already at the position that I wanted to be) 

  I just want to make a dart without editing the curvature or position of the line

  Which I couldn't do 

  Also in the tutorial regarding darts,when creating a dart this msg (as shown in fig.) doesn't show up

  And the dart just done automatically

  Maybe I missed something there but I really couldn't see it

  Appreciate your help 

  And thanks again 

  0
• CLO Designers

  • 3 janvier 2021 19:30

  Hi scofty. CLO 6.0 added the dart truing option most recently. Which many people like, but if you do not want the dart to change your simply hit enter to finish the function and then after use your Edit Curve Pint tool to remove the curve points that CLO just added. This should return the line to its original shape

  0
• pdancie

  • 2 février 2021 19:19

  I will say that after trying to create a dart numerous times with this feature showing up, I did click "enter" and my dart stayed. My lower armhole cure however, converted to a straight line regardless of how many curve points I had in the line so I had to re-shape it. I didn't like that because I had my original armhole curve just the way I wanted it. I do like the "trued" dart though.

  0
• hansa

  • 4 avril 2021 19:08

  Hello, I have different question with the same topic; the link is here for only 30days: https://ufile.io/4et3xua6

  0
• hansa

  • 5 avril 2021 10:29

  Okay, this is it: https://youtu.be/cGMqDfuBHPY

  0
• CLO Designers

  • 5 avril 2021 13:02

  hansa Thank you. That was very easy and helpful. The dart tool you are using is available on a SEGMENT POINT. You would need to either add a Segment Point or Convert a Curve Point to a Segment Point.

  1
• hansa

  • 7 avril 2021 15:19

  Thank you. Still do not get it because the point is segment and you can either make it convert a Curve point. Afterall, I made a new method how to make equal darts in my own (not right) way. There are link: https://youtu.be/GiDxw9Qcrak

  0
• farinazfz

  • 22 septembre 2021 05:55

  hello!

  fisheye dart Is not working and its not returning to the hole 

  how can I make a simple fisheye dart 

  I attached the picture

  1

Vous devez vous connecter pour laisser un commentaire.