CLO Centro de Ayuda
aann
- Actividad total 55
- Siguiendo 0 usuarios
- Lo siguen 0 usuarios
- Última actividad
- Votos 0
- Suscripciones 22
- Miembro desde
Resumen de la actividad
Última actividad de aann-
aann hizo un comentario,
Hi Mohammed, I might be able to help, I teach at London College of Fashion. You can contact me on annikaa@msn.com to discuss further if you like.
-
aann hizo un comentario,
Select the two pattern edges that you want to merge with the edit pattern tool (hold down ctrl/cmd button to multiple select). Right click and choose merge pattern.
-
aann hizo un comentario,
I had exactly the same problem for about 1 week, see pic. Any new files that I created with the same displacement maps that I had used in the past or even if I re-created the displacements, it didn...
-
aann hizo un comentario,
Try to lower the partial distance to 10.
-
aann hizo un comentario,
Ottoline, thanks for your suggestions as I have noticed that you have a wealth of knowledge from a lot of posts. Unfortunately in this case it has not solved the issue. I have contacted Clo technic...
-
aann hizo un comentario,
Ottoline, thanks for your suggestions. So, I've tried different colour (greys) displacement map and it makes not difference. I also tried the different material settings and interestingly gem and g...
-
aann hizo un comentario,
I have tried all the different displacement versions and it has made no difference. I noticed that the displacement map works when used in fabric texture, but not in graphics. This is a very annoyi...
-
aann creó una publicación,
I'm a fairly competent user of CLO3d and have good understanding of how to use the maps. The software has been working fine until recently. However, suddenly the displacement map is not rendering ...
-
aann hizo un comentario,
If you want just to check the measurment and do not need to keep the reference line, you can use the tack tool just to see the measurment. Make sure to remove the tack line afterwards as it would o...
-
aann hizo un comentario,
Hello! Here is link to explain how to use the 2D pattern tools. https://support.clo3d.com/hc/en-us/sections/115000642008-2D-PATTERN