pabloquintana

  • Actividad total 1672
  • Siguiendo 0 usuarios
  • Lo siguen 25 usuarios
  • Última actividad
  • Votos 98
  • Suscripciones 654
  • Miembro desde

Resumen de la actividad

Última actividad de pabloquintana

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Garment is Floating

    It looks like there is more than one avatar there. Start a new project and copy the patterns into it.

    • Ver comentario
    • pabloquintana
    • Editado
    • 1 voto

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Sewing and folding limitations? Simulation and Production questions

    The textured surface sin is all-to-common that I wonder if CLO could do something to make it really hard an un-intuitive to turn it on. As for using manufacturing techniques like folding seams in C...

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. My duffle bag is really rumpled

    Your material is too soft. You have to use a stiffer material or use an avatar inside.  

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Clo3D too slow to do anything on Mac

    lukrecija,  I have been a CLO user and a Power User several years now. I am going to say what you probably won't want to hear: use Windows on a PC with 12 real cores, get a modern RTX GPU, a fast M...

    • Ver comentario
    • pabloquintana
    • Editado
    • 0 votos

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Trace Tool: Pattern outlines and/or holes are intersecting (or too close together).

    Hi vketteniss. I would approach this from two angles: 1. Remove the construction lines after you get the outline shape you are going to extract. You don't need them anymore and they are cluttering ...

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Fail texture on render

    lacreanomade, check the graphic properties of the graphics that must be on top. There is an order for your graphics (just like with any overlapped graphics) and a Z Offset which you can use to brin...

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Button loop pulls thru button in simulation

    If your button is a trim added manually or added via the button function, these are trims, which provide no collision with fabric. You'd need to pin or sew the loop to your fabric and place the but...

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Issues with cord. Please help!

    Hi Candide, let me try and explain what is happening and some avenues to try and solve it. The seam you see is the side seam in CLO, which is showing a bit different than the front and back sides ...

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Curly/lettuce edges - Sharp edges

    First. I would say from the first image that you are not using a particle low enough to accommodate for the geometry that is needed for small curves. Try lowering the particle distance to 5 mm and ...

    • Ver comentario
    • pabloquintana
    • Editado
    • 1 voto

  • pabloquintana hizo un comentario,

    1. Comunidad
    2. Q&A
    3. Editing Substance Files

    Exactly. It depends on who created the SBSAR and which parameters were exposed.