How to Use a Custom Topstitch for Sweater Development Visualization

• designer1
• 9 de octubre de 2018 19:37

Hi Everyone,  I created a cable knit sweater with a custom topstitch. Although this is just for visualization, it is helpful to use for design development. Please see the link to the video below. L...

5 votos 0 comentarios

(Fabric kit) Modifications for Stretch Test

• mason
• 4 de octubre de 2018 05:24
• Editado

There is a change in the method of Stretch Test, so i share it below.   [When the fabric is pulled by 1mm and the force is less than 0.01kgf] 1. Pull the fabric until the force value is 0.01kgf. 2....

0 votos 0 comentarios

Making Internal Lines Disappear

• Dita Varna
• 27 de septiembre de 2018 11:54

Hi all,  Just like in this sample of "horsehair hem", often we need internal lines, but we don't need to see them on the garment. If you haven't already come across these little life-changing trick...

1 voto 0 comentarios

Summer 2018 NYC Training Workshop Attendees!

• Caley
• 10 de septiembre de 2018 21:12

Thank you to everyone who attended our Workshop at the BF+DA in Brooklyn, NY last week! Please feel free to keep in touch with other trainees or post comments & questions below. We look forward to ...

4 votos 0 comentarios

Fabric texture for paping. How to managing the texture of the piling.

• vadsura
• 31 de agosto de 2018 19:51

Piping has a horizontal location on the UV coordinates. For controlling texturing paging you need to do the following. 1. Create a copy of the main fabric. (For paping) 2. Select it fabric.3. Creat...

1 voto 0 comentarios

Direction of the grain lines - is there a possiblity to get an arrow in only one direction?

• Johanna Böhm Eberlein
• 26 de agosto de 2018 14:28

Hi =) i have some difficulties with the grain lines:1) is it possible to place the grain lines somewhere whithin the pattern, where it stays and is fixed? Also in the printing mode, and when it is ...

2 votos 0 comentarios

Training Workshop at BF+DA in Brooklyn, NY

• Caley
• 16 de agosto de 2018 17:09
• Editado

JOIN US:  Join CLO 3D Designers for a 3 day workshop to learn about our software and how to use our favorite design tools. Chat with other users and network with those in our CLO community. All le...

2 votos 0 comentarios

Bucket Bag - Drawstring

• innovativehjhj
• 10 de agosto de 2018 09:09

Hi everyone! TGIF!! Celebrating Friday, let me share a simple tip: creating drawstring for a bucket bag. Check out the video here.  

2 votos 0 comentarios

Why is CLO widely used? Let's learn about the rising software in the fashion industry, CLO.

• supermaam
• 8 de agosto de 2018 18:54

   Hello! I'm Koming from How-to-CLO.     I'll making CLO3D tutorials in How-to-Clo Youtube channel.    Learning CLO can be easy and fun. With me! How-to-CLO! XD    You can master CLO!!    Follow ...

2 votos 0 comentarios

How to express the bright fluorescent colors in CLO?

• widow99
• 27 de junio de 2018 01:12

Hey guys,I’d like to share the way to express the bright fluorescent colors in CLO. Choose the most saturated color in your fabric's most suitable color, but be slightly darker than the color you ...

1 voto 0 comentarios

Rectangular Pleats - & Picot Trim Tutorials

• theblondedon
• 22 de junio de 2018 18:08

Hi Everyone! Here is a quick video showing an easy method to make pleats! It's really easy to attached a small piece and then build, fold and simulate as you go. If you do your math correctly you c...

2 votos 0 comentarios

Ruff Collar

• virtualprismvision
• 15 de junio de 2018 09:16

Here is a video how to do an old school ruff collar. There are captions along the video, that should help to follow along with the steps. LINK TO THE VIDEO Let me know where you could imagine to us...

0 votos 0 comentarios

Strip of dustcoat

• c64fe4bdeacf47a3a032
• 12 de junio de 2018 02:05

Hey everyone, I’d like to share you video to express strip of dustcoat. The following are steps: Arrange pattern in proper place. Add internal line and sew with strip outline. Adjust shape of stri...

0 votos 0 comentarios

How to make a tie.

• widow99
• 30 de mayo de 2018 01:55

Hey guys,I’d like to share you the video to do the tie.   Below is the step: Make the pattern drape on the avatar. Use pin tool to fix the both end of the tie and make them come through each ot...

0 votos 0 comentarios

Adding that last bit of realism with add'll thickness + curved side geometry **denim

• lisakohlert
• 14 de mayo de 2018 21:22

Your denim seams look too flat? So do other garments from a closer look from the sideview!? ...With the following quick steps, get the most out of your garments. --> add'll thickness rendering + cu...

3 votos 0 comentarios

How to make an elastic band bow-knot?

• widow99
• 9 de mayo de 2018 01:12
• Editado

Hey!Guys,I'd like to share the method to get a realistic elastic band bow-knot! Make the bow-knot with separate paterns, you can add pins when you want. Lower the particle distance.Simulate then ...

2 votos 0 comentarios

Chinese fan

• ying228
• 16 de abril de 2018 02:10

Recently, I made a Chinese fan and I would like to share with you my works! 1. Creating the patterns of the fan 2. Placing the fan's patterns on the ground to make sure the shape wouldn't change w...

4 votos 0 comentarios

Twist the fabric several times

• s2bonnies2
• 6 de abril de 2018 08:24
• Editado

Hi. : ) When You twist fabric many times, I want to show you how to twist it safely. I explained the intermediate steps below, and I uploaded the Youtube link. I hope it helps. Go to Youtube video ...

2 votos 0 comentarios

Create simple accessories that inspire you !

• dowhatyoulove
• 4 de abril de 2018 07:21

You can create and add up some simple accessories !   Here are some tips to add simple accessories in 10 mins! Even though it is not very detail-finished sunglasses, it would be enough to give an e...

4 votos 0 comentarios

Make the Chinese Frog on the Cheongsam in CLO

• widow99
• 2 de abril de 2018 09:54

Hey Guys! I just figured out a way to make the Chinese Frog on the Cheongsam! BTW, the Chinese Frog is this one ↓ To Make a Chinese Frog, you should do these steps: 1.Make a rectangle pattern that...

0 votos 0 comentarios

Looking for freelancer to create 3D models

• gihan
• 26 de marzo de 2018 16:16

Hey there, I'm from Ministry of Supply and we're looking for a partner to help us with creating 3D models of our core product line. We'd be able to provide production techpacks, and we'd be looking...

2 votos 0 comentarios

Clo3d Tutor Needed in Vancouver, BC

• bsaunders
• 23 de marzo de 2018 02:08

Hi, I am a clothing designer in Vancouver, Canada who really wants to master the Clo3D software. If you or anyone you know is a Super User and willing to Train me.....I would be so grateful.  Of co...

1 voto 0 comentarios

[Tip] Custom ZIpper in CLO

• innovativehjhj
• 21 de marzo de 2018 01:43
• Editado

Hey all! I just figured that once you create the zipper with Zipper tool in CLO, you cant really sew its end to the patterns. So! here I share the tip to create custom zippers in CLO. Quite easy! C...

3 votos 0 comentarios

Creation with Line(Avatar)&Flatten

• c64fe4bdeacf47a3a032
• 19 de marzo de 2018 07:42

Hey,guys.   I find ‘Line(Avatar)’and ‘Flatten’ in CLO are so creative ,I want to share with you. Before drawing lines on avatar , we can draw tapes for reference lines. Then you can star your creat...

6 votos 0 comentarios

How do I fix pleats?

• Amy Canavan
• 26 de febrero de 2018 19:49

Q: The tucks on this shirt aren't laying properly. Is there a way to adjust them so they look correct? A: Absolutely!  SEE TUTORIAL VIDEO HERE Step 1: Lower the particle distance Step 2: Deactivate...

1 voto 0 comentarios

How to create ruffles in CLO

• care
• 26 de febrero de 2018 05:47

Hi all,I'd like to share you how to make ruffles in CLO. Please see the operations as below. Create a rectangle pattern Offset internal lines along curve Use 'Slash & Spread' tool to spread the pa...

-1 votos 0 comentarios

CHANGEOFPARADIGM.COM RECRUIT

• maryll
• 13 de febrero de 2018 11:08

www.Changeofparadigm.com  Photorealistic garments for luxury e-commerce, AR and VR App In the Framework of its growth miximaliste.com looking for CLO/Marvelous Designer Artists Good knowledge of CL...

0 votos 0 comentarios

Making "4" variations in 20min!

• innovativehjhj
• 6 de febrero de 2018 09:57
• Editado

Hey guys~ I was playing around with CLO and wanted to show off something! I made four variations in 20min, starting from a t-shirt, a polo t-shirt, a turtleneck sweater to a zip-up training jacket!...

1 voto 0 comentarios

Expressing buttons in different materials

• cmwk0309
• 2 de febrero de 2018 09:37
• Editado

Hi all,   This time I am going to share how to express buttons in different materials. 1.Fabric Covered Shank Buttons     2. Leather Shank Buttons 3. Metal Shank Buttons 4. Plastic Shank Buttons  ...

1 voto 0 comentarios

How to Express Falbala

• c64fe4bdeacf47a3a032
• 22 de enero de 2018 01:09

Hello, everyone. I’ll share how to express the falbala on clothes. Hope it helps!   Determine the length of the internal line. Use Rectangle tool draw a rectangle that the width is longer than the...

3 votos 0 comentarios