Undo issue

Follow

ho33ein500

• 16 de mayo de 2023 14:55

The undo operation is incomplete. The shape of the fabric does not return to before the simulation. Only in the transform operation, the undo operation works correctly. But when the simulation takes place, I cannot go back. The fabric does not change its shape, it only moves before the simulation.

0

• CLO Designers

  • 17 de mayo de 2023 09:39

  Dear ho33ein500,

  Have you tried going several steps back? Simulation might not have been the last step registered in the log. You can check the  History:

  

  And jump to the step before "simulate". Note that whenever a file is closed, the history is lost. So when a file is reopened, previous steps are not remembered. If you want a status to stay intact, you can use Add 3D State inside the history and jump back to it later (but be aware that this increases the file size quickly).

  

  0
• ho33ein500

  • 17 de mayo de 2023 10:30

  Yes
  I checked from the history window.
  I did a simple test for you to understand.
  At the beginning of my work
  I brought a t-shirt from the garment section of the library.
  I moved the sleeves a little to make history
  I simulated and the operation was done correctly.
  But no matter how much I undo, the fabric does not return to the state before the simulation.

  0
• ho33ein500

  • 17 de mayo de 2023 10:46

  I have 3 computer

  1- CPU: AMD3900X   GPU:2060 Super   Ram: 32GB     windows: 21h2

  2- CPU: Intel 11700k    GPU: on Board     Ram:32GB     windows: 22h2

  3 - Laptop Lenovo E550   CPU: cori5 5200u   GPU: AMD R7 M265   Ram: 8GB   Windows:2020 ver:190.41

  This problem exists in all three of my systems.

  They are all like this.
  But my friends who are working with this software do not have this problem.
  And I researched and couldn't find the solution. 

   

  0
• CLO Designers

  • 23 de mayo de 2023 09:38

  Dear ho33ein500, I'm currently gathering insight and will get back to you asap.

  0
• CLO Designers

  • 26 de mayo de 2023 13:13

  Hi ho33ein500,

  This article describes a different issue, but please scroll down to the description of how to run CLO with administrator rights on Windows: https://support.clo3d.com/hc/en-us/articles/17074279996697-Disk-access-rights-required-when-CLO-running

  When it is done, can you test again if the issue still occurs?

  0

Iniciar sesión para dejar un comentario.