Layering Issue
I am a new user but I am having an issue with layering two garments. I want the jumper above the trousers of my avatar.
I have set the jumper to a higher layer and even set the trousers to a lower layer but I always get the same result.
The back half of the jumper always goes under and the front above. Could I be missing some other setting that forces this?
-
Hi! I suggest you two things:
1. Try coordinating the garments with pants unfrozen!
2. Make sure jacket Patterns' right sides are facing up. If the Patterns right side is facing towards the avatar, not towards outside, the Layer option may not work properly.
As you see in the image above, although the white pattern has Layer 1, larger value than the pink pattern, pink pattern is placed on top of white pattern since the pink pattern's right side is faced down. To work normally, the pink pattern's right side should face up.
After I use the Flip Normal option, facing the pink pattern's right side up, it works perfectly!
Tip: Choose Textured Surface icon for Garment Rendering style to check whether right side of Patterns are faced correctly. (https://support.clo3d.com/hc/en-us/articles/115012380508-Garment-Rendering-Style)
0 -
Hi Erica.
I had suspected it could relate to having flipped normals so I had changed the ones on the back panel of the hoodie. The 'Textured Surface' check was exactly what I needed, the normals on the trousers were the issue, and I found that the inside of the hood had the same issue so thanks.
Very helpful
Alan
0 -
glad to know it worked out :)
0
Comments