How can we help you?

Create OBJ

Register OBJ 

Register your own OBJ file as a Slider/Puller/Stopper.

Location  

Main Menu ▶ Materials ▶ Zipper ▶ Register OBJ
 

Property Editor ▶ Shape ▶  
 

Create OBJ

Check the requirements below when making OBJs in other 3D programs.

※   Essential

• Set the name of the MESH to Slider and Puller when creating an OBJ with a slider and a puller.
  
   

• For each type, adjust the position to suit the meaning of the axis.
  (If the position of the axis is not correct, the OBJ may not be loaded in the correct position)
   

  Option	Description
  Slider	X-Axis	Position the shoulder of the slider where zipper teeth insert on the X-axis 0.
  	Y-Axis	The direction the slider moves is the Y-axis, Position center of the slider where the center of the zipper teeth aligned at 0 of the Y-axis.
  	Z-Axis	Position the Z-axis 0 where the side of the zipper teeth is located.
  Stopper	The stopper configured on both sides must be made to be the same scale as the two OBJ axes.
  	X-Axis	Position the shoulder of the slider where zipper teeth insert on the X-axis 0.
  	Y-Axis	Top Stopper Position the point where the most end (top) of the zipper blade is in contact with the Y-axis 0. Bottom Stopper When the slider is lowered all the way, the point where it touches the bottom of the slider is positioned on the Y-axis at 0.
  	Z-Axis	Position the Z-axis 0 where the side of the zipper teeth is located.
  Puller	Place the position where the slider is attached at the origin (0,0,0). ✨Tip: The puller position is adjustable within the CLO.
  Slider & Puller	Create sliders & pullers are created based on the slider axis.

Register OBJ 

1. Click the Materials ▶ Zipper ▶ Register OBJ in the top menus.
   Or, click the button next to the type you want to register in the Zipper Style properties.

    

2. After setting the following options, click the OK button. 

   Option	Description
   Basic	Type	Select the type (Slider, Puller, Stopper, Slider & Puller) to register the OBJ.
   	Name	Enter a file name.
   	Scale	Adjust the size of the OBJ.
   	Axis Conversion	Change each axis of the OBJ.
   File	OBJ	Slider / Puller	Load the OBJ file you want to register.
   		Stopper (Top, Bottom-Open)	Load each Top and Botton-Open OBJ file.  The first OBJ loaded is placed in the direction of the zipper created first.
   		Slider & Puller	Load a combined zipper OBJ file. Select and assign the mesh item of Slider and Puller in the Select Mesh menu.
   		Teeth	Load the OBJ file to register as the zipper teeth. The spacing between the teeth is set to 0 mm by default. Adjust the spacing while previewing the result in the preview window.
   Preview	Check the imported OBJ file in advance.
   	Puller Position	For Slider or Slider & Puller type. Adjust the sliders on the X, Y, and Z axes to set where the puller is attached.

   → The object is saved in the path below:
   　 Assets ▶ Materials ▶ Hardware_and_Trims ▶ Zipper ▶ Each object's folder
    

✨Tip: Registered files are automatically saved as presets and can be easily selected in the Zipper Style properties.