Convert to Avatar
- Convert 3D dummies or body scans to CLO avatars maintaining their body shapes.
- Main Menu ▶ Avatar ▶ Convert to Avatar
Load 3D Body file
- Navigate to Main Menu ▶ Avatar ▶ Convert to Avatar
- Load a 3D body file, preferably in attention pose, as a reference for the conversion.
- Select the CLO Avatar to be converted with the 3D body file.
- Click Next.
- Change Avatar Pose
- Select the Pose folder corresponding to the loaded Avatar.
- Load attention pose.
- Check Joint Rotation Only and select OK.
- Align Height and Inseam with Avatar Size Editor
- Select Open Avatar Size Editor.
- Adjust Height to align the shoulder height between the CLO Avatar and the 3D body.
- Adjust Inseam to align the crotch height between the CLO Avatar and the 3D body.
- Once the adjustment is completed, close the Avatar Size Editor.
- Align Avatar Joints
- Align all joints: total body, ankle, arm, and neck.
- Make sure to align above four locations as closely as possible for more accurate conversion.
- Select Convert once all adjustments are completed.
- Rotate to check the quality of the converted avatar.
- Click Save as Avatar to save the converted avatar when it's satisfactory.
- When additional modification is needed, click Back to repeat previous steps.
Comments