How can we help you?

Objective

Plot 2D Patterns to manufacture real garments.

Location

Main Menu ▶ File  ▶ Plotter

Operation

1. Follow the indicated guideline below:
   
   Main Menu ▶ File  ▶ Plotter
   
   Case 1) When above option is selected in the Print Layout Mode:
   → The 2D Snapshot window appears.
   
   Case 2) When above option is selected outside of the Print Layout Mode:
   Following error message appears: "Mode will switch to Print Layout as patterns need to be arranged to fit the paper size." Click OK.
   → The 2D Snapshot window appears.
   
   Case 3) When above option is selected outside of the Print Layout Mode & Fabric has no applied texture:
   Following error message appears: "Texture must be applied to a Fabric to switch to Print Layout mode." Apply a texture to a fabric and try again.
   → The 2D Snapshot window appears.
     
   

2. Refer to below table and select lines and information to be plotted.
   

   Option
   Cut on Outline	Toggle on to cut Patterns on its outline or seam allowances.	Line	Select lines to be plotted.
   		Info	Select information to be plotted.

3. Select Plotter.
   → Patterns are plotted to the configured plotter.