CLO HELP CENTER

How can we help you?

Add Perpendicular Internal Lines

Follow

List of Contents  

Add Perpendicular Internal Lines

Add From a Point 

Add From a Line

 

Add Perpendicular Internal Lines

- Create Internal Lines perpendicular to selected Pattern outline or point, or perpendicular to X or Y axis of 2D window.

- Select the Edit Pattern tool from the 2D toolbar.

- Right click on the point where an Internal Line should be added and select Add Perpendicular Internal Line.


Add From a Point

  • X-Axis

    - The Add Perpendicular Internal Line window appears.

    - Configure Angle and Length of the Internal Line based on the X axis

    - To extend the Internal Line to the Pattern outline, please toggle on Extend option.

    Note: To add the Internal Line opposite from current direction, toggle on Reverse option.

  • Y-Axis

    - The Add Perpendicular Internal Line window appears.

    - Configure Angle and Length of the Internal Line based on the Y axis.

    - To extend the Internal Line to the Pattern outline, please toggle on Extend option.

    Note: To add the Internal Line opposite from current direction, toggle on Reverse option.

  • Local

    - The Add Perpendicular Internal Line window appears.

    - Configure Angle and Length of the Internal Line based on the selected point.

    -  To extend the Internal Line to the Pattern outline, please toggle on Extend option.

    - To add the Internal Line based on the opposite side of the selected point, toggle on Refer to Opposite Segment.

    Note: To add the Internal Line opposite from current direction, toggle on Reverse option.

 

 Add From a Line

  • X-Axis

    - The Add Perpendicular Internal Line window appears.

    - Configure Angle and Length of the Internal Line based on the X axis and its Distance to Segment Edge.

    - To extend the Internal Line to the Pattern outline, please toggle on Extend option.

    - When the Length value is different from the length when it is extended, the option turns off automatically.

    Note: To add the Internal Line opposite from current direction, toggle on Reverse option.


  • Y-Axis

    - The Add Perpendicular Internal Line window appears.

    - Configure Angle and Length of the Internal Line based on the Y axis and its Distance to Segment Edge.

    - To extend the Internal Line to the Pattern outline, please toggle on Extend option.

    - When the Length value is different from the length when it is extended, the option turns off automatically.

    Note: To add the Internal Line opposite from current direction, toggle on Reverse option.


  • Local

    - The Add Perpendicular Internal Line window appears.

    - Configure Angle and Length of the Internal Line based on the selected segment and its Distance to Segment Edge.

    - To extend the Internal Line to the Pattern outline, please toggle on Extend option.

    - When the Length value is different from the length when it is extended, the option turns off automatically.

    Note: To add the Internal Line opposite from current direction, toggle on Reverse option.

 

Was this article helpful?
0 out of 0 found this helpful

Comments

Please sign in to leave a comment.