CLO HELP CENTER

How can we help you?

Edit Binding Properties

Follow

Objective 

Edit Binding Properties.


Location

Main Menu ▶ Materials ▶ Binding ▶ Select Binding

3D Toolbar ▶ Select Binding 


Operation

  1. Follow indicated guideline below:

    Main Menu ▶ Materials ▶ Binding ▶ Select Binding

    3D Toolbar ▶ Select Binding

    → The 3D Garment becomes translucent and its Pattern Outline with Binding is marked in grey.

    ※Note:  Binding can also be selected with Toolbar_3D_Select_Move.png Select/Move tool from the 3D toolbar.
      
  2. Select the Binding to be edited. 
    → Its properties appear in the Property Editor.  

  3. Configure each property as needed referring to below table.

    Option

    Description

    Name

    Rename Binding's name.

    Line Length

    Check Binding' length. However, it cannot be changed from the Property Editor.

    Type

    (ver4.2.0)

    Under

     Express Inside Bindings (ver4.2.0).

    Over

     Bindings are placed over the Patterns (ver4.2.0).

    Dimension

    Width (mm)

    Adjust selected Binding's width. (1~30mm)

    Length (%)
    (ver5.0.0)

    Adjust selected Binding's length with percentage (50% ~ 200%) or a specific value.

      When the Binding is adjusted with a value, its unit follows the program's unit.

    Particle Distance (mm)

    Edit selected Binding's Particle Distance. (1~20mm)

      Add'l Thickness - Collision (mm)
    (ver5.0.0)

    Adjust Binding's Add'l Thickness - Collision.

    Fabric

    Assign Fabric to the Binding. 

    Fabric styles in the Fabric Object Browser appear in a list.

    Grain Direction
    (ver.5.1.0)

      Bias/ Warp/ Custom Choose among Bias, Warp, or Custom for the Binding's grain direction.
      Angle Manually insert Angle value to set the Binding's grain direction.

    Topstitch
    (ver4.2.0)

    Add Topstitch to the Binding (ver4.2.0).
    Only Topstitches in the Topstitch Object Browser appears for the options (ver4.2.0).

    Sewing Line Type

    Edit Binding's Sewing Line Type. 

    Arrangement

    Place the Binding below or above the Pattern.

    This option is not available in ver4.2.0 and above.

     

Was this article helpful?
2 out of 2 found this helpful

Comments

Please sign in to leave a comment.