CLO HELP CENTER

How can we help you?

Garment Fit Maps

Follow

Objective

Utilize four Garment Fit Maps in the 3D window to check 3D Gament's fit.


Location

3D Window ▶ Hover the Mouse Over the 4th Icon


Operation

  1. Follow the indicated guideline below: 

    3D Window ▶ Hover the Mouse Over the 4th Icon

    → Four Garment Fit Maps appear.

  2. Refer to the table below and select the desired view icon.

    Icon Description
    Stress Map   External stress causing garment distortion per area of the fabric appears in the range of color and numbers.
      Stress Map appears in total eight colors: Red indicates the strongest stress (100kPa) while blue indicates zero distortion (0.00kPa). Other numbers in between are expressed as gradation of two color.
    Strain Map   Garment's distortion rate due to external stress appears in percentage.
      Stain Map appears in total eight colors: Red indicates 120% of distortion rate while blue indicates 100% (no distortion). Numbers in between are expressed as gradation of two color.
    Fit Map   Fip Map shows tightness of the 3D Garment.
      Can't Wear appears in red indicating not wearable area.
      Very Tight appears in orange indicating very tight area.
      Tight appears in yellow indicating slightly tight area.
    Show Pressure Points   Show or hide contact points between 3D Garment and Avatar.

    → Based on the selected icon, Stress Map, Strain Map, Fit Map, or Pressure Points appear on the 3D Garment.
Was this article helpful?
0 out of 0 found this helpful

Comments

Please sign in to leave a comment.