How can we help you?

Objective

Utilize the four Garment Fit Maps in the 3D window to check the fit of garments.

Location

3D Window ▶ hover the mouse over the 7th icon

Operation

1. Follow the indicated guideline below: 
   
   3D Window ▶ hover the mouse over the 7th icon
   
   → Four Garment Fit Maps appear.
   
   
2. Refer to the table below and select the desired view icon.
   
   

   Icon	Description
   Stress Map	Force along the fabric grain per unit area of the fabric that causes garment deformation; appears in a range of colors and numbers.   The Stress Map appears in a total eight colors: Red indicates the strongest stress (100kPa) while blue indicates zero distortion (0.00kPa). Other numbers in between are expressed as a gradation of two colors.
   Strain Map	Garment's stretch rate due to external force; appears in percentage.   The Strain Map appears in a total of eight colors: Red indicates 120% of stretch rate while blue indicates 100% (no stretch). Numbers in between are expressed as a gradation of two colors.
   Fit Map	The Fit Map shows tightness of the garment.   Can't Wear appears in red indicating a non-wearable area.   Very Tight appears in orange indicating a very tight area.   Tight appears in yellow indicating a slightly tight area.
   Pressure Map	External pressure exerted by garments onto avatars.

   
   → Based on the selected icon, the Stress Map, Strain Map, Fit Map, or Pressure Map appear on the garment.