CLO HELP CENTER

How can we help you?

Set View Control

Follow

Objective 

Change the default settings of the software menu according to user preference in User Settings.
Upon restarting, the user settings of the software becomes the default settings. 
Shortcut keys, menus, graphic options, view controls, and other miscellaneous properties can be set in User Settings.


Location

Main Menu ▶ Settings ▶ User Settings ▶ View Control


Operation

  1. Follow the indicated guideline below:

    Main Menu ▶ Settings ▶ User Settings ▶ View Control

    ※ Note: A key and mouse control combination can be set for one function. If a combination is repeated, the interface may not work properly.

    Preset   Select one of the default presets.

    Pan

      Select a key and mouse combination for moving the screen.

    Zoom

      Select a key and mouse combination for zooming in or out the screen.
    Rotate
    (3D Window)
      Select a key and mouse combination for rotating the screen.

    Popup Menu

      Select a key and mouse combination for opening the pop-up menu of the 3D Window.

    Others

      Axis Constraint Key

      Select the key that is used to move items across a constrained horizontal axis, vertical axis, or 45º angle.
      Smart Panning   Toggle on/off the option to Pan automatically based on the location of the mouse cursor while using certain functions.
      (Ver .2.5.0)

    Auto Focus
    (ver5.0.0)

      Toggle on to automatically change the 3D window's focus point based on the user's click. 

      Switch back focus to the default when unselected: The 3D window's focus point returns to all objects when an object is not selected. This option only appears when the Auto Focus is toggled ON.

    View Point

    Default Y-Axis Position

      Set the default position of the Y-Axis.

    Default X-Axis Position

      Set the default position of the X-Axis.

    Default Camera Distance for Viewpoint Shortcuts

    (ver4.2.0)

      Set the distance between the object and the camera when using the shortcut for view control.
      Change this setting when the default distance is too far away from the small object.
     

    ※ Note: 

    Right-Clicks on a MAC

    By default, right-clicks are disabled on Macs (Magic Mice, as well as others.)
    However, the right-click gives you access to important pop-up menus in CLO.
    You can easily enable right-clicks for your Mac mouse by following the instructions below:

    1. Navigate to System Preferences (either from your dock or from the Apple menu on the top left hand corner of the screen.)



    2. Select Mouse.



    3. The Secondary Click (Click on right side) option will be unchecked. Check it to enable right-clicks.

     

    Wacom 3D Pen (ver 6.0)

    Set Wacom 3D Pen as the guide below and preset as 'Regular Mouse' in CLO.

    [Wacom 3D Pen Setting]
    Open Wacom Desktop Center ▶ Select device ▶ Pen Setting ▶ Set same as below  
    Wacom.png

    Move Hold down the upper button while hovering, move the pen on the tablet.
    Zoom Hold down the middle button while while the pen tip is touching device, move the pen in the vertical direction.
    Rotate Hold down the buttom botton while the pen tip is touching or being placed close to the device, move the pen to rotate.

     

Was this article helpful?
2 out of 6 found this helpful

Comments

Please sign in to leave a comment.

  • Avatar
    myoneshima

    You have a repeated wording and spell mistake at Wacom 3D Pen description: Move: Hold down the middle button while "while" the pen tip is touching device, move the pen in the vertical direction.
    Hold down the "buttom" botton while the pen tip is touching or being placed close to the device, move the pen to rotate. Thanks