CLO HELP CENTER

How can we help you?

Steam

Follow

Objective 

Shrink or stretch Fabric partially like as using a steam iron.


Location

Main Menu ▶ Materials ▶ Steam ▶ Steam

2D Toolbar ▶  Steam 


Operation

Steam Setting

  1. Follow the indicated guideline below:

    Main Menu ▶ Materials ▶ Steam ▶ Steam

    2D Toolbar ▶ Steam  

    → All Patterns are now being displayed in mesh.
    → The Steam Brush appears at the top-left corner of the 2D window.

  2. Set the value as desired.

    Shrinkage   Sets the shrinkage level.
    Size   Sets the size of the brush.
    Hardness   Sets the hardness of the steam.
  3. Click and drag on desired area to steam.
    → According to the shrinkage, the selected area is now being displayed in light-blue or orange. 

  4. Activate the Simulate_None.png Simulate.

Remove Steam

  1. Follow the indicated guideline below:

    Main Menu ▶ Materials ▶ Steam ▶ Steam

    2D Toolbar ▶ Steam  

  2. Right-click on a pattern to remove steam, and select either Remove Steam on Selected Pattern or Remove All Steam
    → The steam is now being deleted accordingly.

※ Note: It can also be removed from the same right-click pop-up menu with Toolbar_2D_Pattern_Edit.png Edit Pattern or Toolbar_2D_Pattern_Transform.png Transform Pattern tools.

 

Was this article helpful?
0 out of 0 found this helpful

Comments

Please sign in to leave a comment.