CLO HELP CENTER

How can we help you?

Hi/Low-Resolution Garment

Follow

Objective

Enhance or lower the resolution of Garments. Use this function to enhance the Garment completion in order to emphasize reality and higher quality of a Garment and on the other hand, reduce it for faster adjustments.

 

Location   

Main Menu ▶ 3D Garment ▶Hi-Res Garment / Low-Res Garment 

3D Toolbar ▶  Hi-Res Garment / Low-Res Garment


Operation

  1. Follow the indicated guideline below:

    Main Menu ▶ 3D Garment ▶Hi-Res Garment / Low-Res Garment 

    3D Toolbar ▶  Hi-Res Garment / Low-Res Garment

    → Hi/Low-Res Properties window appears. 

  2. Adjust the value for each item.

    Garment Particle Distance

      Sets the Particle Distance value applying to all Patterns.
      - Hi-Res Garment default value: 5mm
      - Low-Res Garment default value: 20mm

    Tolerance

      Applies only for Patterns within the range of application of Particle Distance.
      The default tolerance value is between 5mm ~ 20mm, and any Pattern within the range set above is going to be applied.

      ※ Note: This is provided to maintain the particle distance value of small patterns below 5mm for more stable simulation. Being mindful of the tolerance can avoid unintentional changes to these patterns. 

    Add'l Thickness - Collision

      Sets the collision thickness value applying to all patterns.
      - Hi-Res Garment default value: 1mm  
      - Low-Res Garment default value: 3mm

    Tolerance   Any Pattern within the range set above is going to be applied.
    Avatar Skin Offset   Sets the skin offset value applying to avatar.
      - Hi-Res Garment default value: 0mm
      - Low-Res Garment default value: 3mm
    Tolerance   Any Avatar within the range set above is going to be applied.
    Simulation Simulation Quality

      Sets the simulation quality as Complete or Normal.
      - Hi-Res Garment default value: Complete

      - Low-Res Garment default value: Normal

      ※ Note: Set the simulation quality on Complete for material properties generated in Emulator Mode to result the most accurate simulation. However it may slow down the simulation speed therefore it is recommended to apply this setting when enhancing the garment completion. 

    Check On/Off Menus   Toggle option whether to apply on Garment, Avatar, Simulation settings.


  3. Click OK button.
    → The adjustments are now being applied.

  4. Activate the Simulation.
    → The adjustments are now being applied to Garment Simulation.
Was this article helpful?
0 out of 0 found this helpful

Comments

Please sign in to leave a comment.