CLO HELP CENTER

How can we help you?

Elastic

Follow

Objective

Insert elastic to the outer/internal lines of a Pattern to express shirring details. 


Location

Pattern Property Editor ▶ Select a Line  ▶ Elastic

Operation
  1. Select a outer or internal line with  Transform Pattern or  Edit Pattern tool.

  2. Follow the indicated guideline:

    Pattern Property Editor ▶ Select a Line  ▶ Elastic

  3. Click the checkbox and set it On.

  4. Adjust the intensity and ratio of the elastic.

※ Note: 

Elastic Properties

Elastic   Decides whether to insert an elastic or not. Even though adjusting the value of intensity and ratio is not going to be applied, if this is not being checked.
Strength

  Increase or decrease the elastic intensity value. 
  Even if elastic that has the same ratio, may be affected differently depending on their intensity.

Ratio

  Shows the elastic ratio when the selected segment is set at 100%.
  Various garment can be expressed by adjusting the elastic ratio. 
  The elastic ratio can be set up to 200% of the maximum segment.

Length

  Adjusts the elastic when the length value is entered. 
  If multiple segments are selected, the entered value will be applied to each segment.

Entire Length   If multiple segments are selected, the entered value will be applied as the total length of the combined segments.
 
 
 
Was this article helpful?
0 out of 1 found this helpful

Comments

Please sign in to leave a comment.